Once the initial setup is complete you can check it any time but not until that point. Because the information about the IP and MAC addresses is located within the system menus of the Apple TV you cannot check it until the initial setup is complete. Locating the IP and MAC Addressīefore we take a peek at where to look for the address information let’s make a quick but important note about when to look for the information. Historically the MAC addresses for the Wi-Fi radio and the Ethernet connection were printed directly on the bottom of the Apple TV unit and you could simply flip it over and type in the address to the web configuration tool or read the MAC address over the phone to the tech support representative.īecause this isn’t an option on the 4th generation units (and given the Apple design aesthetic likely won’t be on future generations of the hardware) let’s take a look how to check these two types of addresses on the software side of things. Same thing if you’ve configured your router with a MAC whitelist or you want to assign static IPs to each device on your network. If you live in a dorm room or other shared living environment where you need to give the system administrator the MAC address of any device added to the network then knowing the MAC address of your Apple TV is critical. There are, however, a handful of situations where knowing the IP address or the MAC address of your Apple TV is a critical part of setting things up. RELATED: How to Set Up and Configure Your Apple TV If you provide incorrect password, the command would fail with the error message “ Logon failure: unknown user name or bad password.For most home users it isn’t particularly important to know the IP address of their Apple TV let alone the MAC address as the Apple TV setup is pretty much plug, quickly configure, and play. If you try this for a Linux machine you would get the error “ The RPC server is unavailable.” Using getmac command we can retrieve the mac addresses of the machines running windows OS only. You will be prompted to enter the password and the command execution will take place after that.

If you do not want to specify the password, you can skip /p parameter. Just run the command getmac to get the mac addresses. It works on XP, Vista, Windows 7, Server 2003 and Server 2008 operating systems. Below are few examples on how to use this command. This can be used to get mac address for remote computers also. We can find mac address (physical address) of a computer using the command ‘ getmac‘.

Apple mac address lookup